Polyacrylamide papermaking
Polyacrylamide papermaking Amphoteric Dry Strength Agent(CPAM based),It can be widely used in papermaking of packaging paper, household paper, newsprint, cultural paper and other paper.$10.00>=1 Kilograms
| Quantity(Kilograms) | 1 - 2000 | >2000 |
| Est. Time(days) | 15 | To be negotiated |
Amphoteric Dry Strength Agent for Papermaking
I. Introduction:
It can be widely used in papermaking of packaging paper, household paper, newsprint, cultural paper and other paper.
It can effectively improve the paper folding strength, bursting strength, stiffness, ring crush strength and so on.
On papermaking system with much anionic impurities or high electrolyte concentration, the effect is particularly evident.
At the same time it has retention effect to flake fine and filler can reduce the loss of fibers and linting and dusting phenomenon.
It can produce enough dry strength and allows the use of inexprensive fiber or a higher proportion of secondhand fiber.
2.Specification:
Type | GL H | GL L |
Appearance | Colorless transparent liquid | |
Solid content % | 20%±1% | 15%±1% |
Viscosity mpa.s(25°C) | 3000-15000 | 3000-13000 |
PH value | 3.5-5.0 | 3-5 |
Storage period(normal temp.)days | 90 | 90 |
Remark:adjust PH value according to customer’s request | ||
3.Function:
The dry strength agent is not only a good enhancement, but it also has a higher enhancement effect in waste papers with more fine fiber filler. The use of our dry strength agent can improve paper quality, and it also significantly increase production efficiency, reduce costs and increase economic efficiency.
4. Method of Application and Notes:
1. When diluted with clean water, the dilution multiples of our product is generally about 15 to 30 times. After the product was stirred sufficiently, add uniformly to the slurry in an amount of 5 ~ 10 kg / ton.
2. Adding position that selected could have a full contact with the slurry. Generally choose ingredients pool, high box or import pump.
3. Use a plastic or stainless steel as the material for products storage, dilution tank, piping etc.. Iron-based material will produce corrosion and thickening phenomenon will occur.
4. Do not mix with other chemicals.
5.Packaging, transport and storage:
Transport should be to prevent from freezing and the sun.
This product should be avoided below freezing and storage temperature is 5 ~ 22 °C.
Incompliance with the above conditions, since the production date, it's valid for 3 months, product should be stored in a cool dry place.
If you are looking for an 48% potassium hydroxide in IBC package for hand sanitizer in China, you are on the right site. Chem9 is located in Dongying, Shandong, China which is a professional company for all kinds of 48% potassium hydroxide in IBC package products, including Food grade 67-63-0 48% potassium hydroxide in IBC package , Chemical solvent 99% 48% potassium hydroxide in IBC package, 99% Isopropanol/IPA, etc. We can provide you kinds of packaging solutions.
Suneco Chem, the name that you can trust. As a vital professional chemical manufacturer in China, we warmly welcome your visit to our factory and talk business face to face! We are at your disposal all the time.
