Cationic Polyacrylamide CPAM
Price Water Treatment System Polymer Mininig Cationic Polyacrylamide CPAM,
Anionic Polyacrylamide is polymer. It dissolves in water. The molecular weight is about 18 million. It is mainly used to treat industrial waste water.$1,500.00,1 – 19 Tons,$1,450.00>=20 Tons
| Quantity(Tons) | 1 - 20 | >20 |
| Est. Time(days) | 5 | To be negotiated |
| Our company produces Polyacrylamide. It is divided into Nonionic Polyacrylamide, Anionic Polyacrylamide and Cationic Polyacrylamide. These products are usually used for all kinds of waste water treatment. And its molecular weight is very high. Some Polyacrylamide has molecular weight of up to two million. The quality is the best and the price is the lowest. |
 |  |  |
| Anionic Polyacrylamide is polymer. It dissolves in water. The molecular weight is about 18 million. It is mainly used to treat industrial waste water. | Cationic Polyacrylamide is Flocculant. It is a linear polymer dissolved in water. Molecular weights range from 6 million to 12 million. Mainly used for sewage treatment. | Nonionic Polyacrylamid is a type of Polyacrylamide. The degree of hydrolysis is between 0 and 5. And it is mainly used for oil well fluid, and acidic waste water treatment. |
| Product Name | Cationic Polyacrylamide | Anionic Polyacrylamide | Cationic Polyacrylamide |
| Appearance | White Granule | White Granule | White Granule |
| Ion Degree | 5%~60% | / | / |
| Hydrolysis Degree | / | 15%~30% | 0~5% |
| Solid Content | ≥90% | ≥90% | ≥90% |
| Dissolution Time | ≤90 minutes | ≤90 minutes | ≤90 minutes |
| Field test on Polyacrylamide | Contact Us |
 |  |
We can see white sludge in these two pictures. This is a field experiment by our technicians at the paper mill. The waste water of paper mill is flocculanted and precipitated after being treated with PAM. The waste water is divided into sludge and clear water. The effect is very good!
| |
 |  |
| This is a comparison experiment. The one on the left is the waste water after adding PAM. we can see that, the impurities in the waste water are slowly setting down, clear water had appeared in the cup. The one on the right is waste water without PAM agent. | This photo shows our technicians selecting the model on site. Because Polyacrylamide has many models. Different waste water need different model to treat. So this situation requires our technicians to go to the site to select the model. It works better this way. |
| About the usage of Polyacrylamide | Contact Us |
1. Polyacrylamide can't be put directlr into sewage, so dissolve in water before using Polyacrylamide. 2. The dissolved water should be clean water, and without heating, but the temperature can't be cold. The temperature is higher than five degress Celsius. Otherwise it will be dissolve very slowly. Temperature above 40 degrees Celsius affect the use effect. 3. Notice: Don't use strong acid, strong base, high salt water preparation. 4. The ratio range is recommended to be between 0.1% and 0.3%. For example, 1 liter of water with 1~3g of agents. 5. If because of other reasons, the dispersion is not good, we suggest that you mix a little more sparse. 6. The water is warmer in Summer. Cationic, Anionic Polyacrylamide should be strict for about 1 hour. Nonionic Polyacrylamide should be strict for about 2 hours. 7. The water is cold in Winter, Cationic, Anionic Polyacrylamide should be strict for about one and a half hours. Nonionic Polyacrylamide should be strict for about 3 hours.
|
 |  |
 |  |
| About Packaging & Delivery Date & Store of Polyacrylamide | Contact Us |
 |
About the Packing of Polyacrylamide. Polyacrylamide is usually packed in 25kg, pp bags or paper plastic composite bags. Of course, we mainly focus on customers, packing according to customer's requirement.
About the delivery Date of Polyacrylamide. Within 7 working days after receiving the payment.
About the store of Polyacrylamide. The shelf life of Polyacrylamide is two years. Don't stack more than 20 layers. Store in a cool, dark, wentilated and dry place, and keep away from moisture. |
| About some pictures of our comapny | Contact Us |
 |
| Foreign Visitors | Contact Us |
 |
If you are looking for an 48% potassium hydroxide in IBC package for hand sanitizer in China, you are on the right site. Chem9 is located in Dongying, Shandong, China which is a professional company for all kinds of 48% potassium hydroxide in IBC package products, including Food grade 67-63-0 48% potassium hydroxide in IBC package , Chemical solvent 99% 48% potassium hydroxide in IBC package, 99% Isopropanol/IPA, etc. We can provide you kinds of packaging solutions.
Suneco Chem, the name that you can trust. As a vital professional chemical manufacturer in China, we warmly welcome your visit to our factory and talk business face to face! We are at your disposal all the time.
