Whether it’s a brand-new chemical business or an established commercial chemical enterprise, if you need Adipic Acid. No worries, Suneco Chem is here to help with all kinds of practical Adipic Acid needs; we specialize in providing Adipic Acid to overseas buyers.
Suneco Chem is ruling Adipic Acid Chemical market over two decades. We always strive to serve in best possible way. Fulfilling our commitment is our motive.
Adipic acid is a crystalline powder with practically no odor. It has the lowest acidity of any of the acids commonly used in foods and has excellent buffering capacity in the range of pH 2.5 to 3.0.
US $1,650-1,850 / Ton |
20 Tons (Min. Order)
Like succinic and fumaric acid, adipic acid is practically nonhygroscopic. Its addition to foods imparts a smooth, tart taste. In grape-flavored products, it adds a lingering supplementary flavor and gives an excellent set to food powders containing gelatin. As a result,
US $1,650-1,850 / Ton |
20 Tons (Min. Order)
Adipic acid is a crystalline powder with practically no odor. It has the lowest acidity of any of the acids commonly used in foods and has excellent buffering capacity in the range of pH 2.5 to 3.0.
US $1,650-1,850 / Ton |
20 Tons (Min. Order)
Adipic acid is a crystalline powder with practically no odor. It has the lowest acidity of any of the acids commonly used in foods and has excellent buffering capacity in the range of pH 2.5 to 3.0.
US $800-850 / Ton |
22 Tons (Min. Order)
If you are looking for Adipic Acid suppliers and manufacturers in China, you are on the right site. Suneco Chem is located in Dongying, Shandong, China which is a professional company for all kinds of Adipic Acid products, including PAdipic Acid Chloride,Adipic Acid,Adipic Acid,Poly Ferric Sulphate etc. We can provide you kinds of Polyaluminium solutions.
Suneco Chem, the name that you can trust. As a vital professional Adipic Acid manufacturer in China, we warmly welcome your visit to our factory and talk business face to face! We are at your disposal all the time.
Are you planning to buy anionic polymer Polyacrylamide? Here is a perfect guide for you. We are going to give you details on all that you should know before buying anionic polymer Polyacrylamide.
At the end of it all, you will be able to choose the best anionic polymer Polyacrylamide manufacturer in China.
Let’s start by defining what an anionic polymer is. This is a special kind of polymer that has an anionic group on each end. One anionic group is negatively charged and the other anionic group bears a positive charge.
The anionic groups help in making the polymer water-soluble so that it can be used in water-based applications such as paper coatings, paints, or any cleaning solutions for instance.
This makes them very suitable for use in industries like paper, pharmaceuticals, oil drilling, mining industry, rubber processing plants, etc.
What is anionic a polymer example?
An anionic polymer is an anionic surfactant that has a portion of its hydrophobe altered to attract an anion.
This structure enables an anionic polymer to act as an ionic salt and increases its solubility in oils such as trichloroethylene, alcohols, ketones, etc.
But the most common use for anionic polymers is in water treatment due to their ability to interact with water molecules.
How do you use an anionic polymer?
You should mix your anionic polymer with other chemicals before using it if required by your application.
For example, if you are mixing it with water then make sure you thoroughly mix the two together until they form a homogenous solution.
Always make sure your anionic polymer flocculant is completely dissolved before use.
An anionic polymer works by attaching itself to an ion such as an anion, an acid, or an alkaline and neutralizing it. It can also be used simply as a coagulant in applications where you want an ion removed from a solution and this is why they are very important when it comes to water treatment.
During the process of removing the anion the anionic polymer forms into a solid material which then collects all other non-dissolved particles within the solution. It ends up creating suspended solids that can then be separated with further filtration processes etc.
They work by decreasing the surface tension of water making it more viscous hence reducing its ability to dissolve anions.
Some of the main uses of anionic polymers include:
· Paints like alkyds and acrylics do not need anything else to bind a surface but anionic polymers because they have high anionic groups.
· They are an excellent water-soluble binder that can be used in water-based applications like paper coatings.
· They have an anionic charge that helps to increase the surface area of an oil film so it can repel water and prevent corrosion
There is no doubt that anionic polymers are important and as such, they will cost an arm and a leg to purchase from any manufacturer even in bulk quantities.
But there are tips in this article which will help you get some good deals for your money especially if you compare prices between different manufacturers. Some factors to keep in mind include:
Safety: Since these polymer materials are going to be used for different applications that come into contact with an individual’s skin, it is very vital to ensure they are safe in this regard.
This is because anionic polymers carry an anionic charge so you want to make sure there is no lathering of anionic charges during use. Also, you do not want them interacting negatively on the skin.
Molecular weight: It would be important to note whether or not an anionic polymer has a high molecular weight as compared to low molecular weight polymers.
This factor determines their properties such as viscosity, solution stability, thermal resistance and foaming ability etc. You will have more options if you go for high molecular weight anionic polymers.
Price: This is an important factor to consider. You have different anionic polymer manufacturers in China so you should compare prices before making any final decision.
Quality: Many anionic polymer manufacturers will claim they are the best but you should ensure they are certified and offer sufficient documentation showing that they meet quality standards for anionic polymers.
Delivery time: This is another vital factor as some anionic polymer manufacturers may promise delivery on time but end up taking longer than expected. This would be frustrating especially if your application relies on an anionic polymer of good quality such as a pharmaceutical company that needs their grades.
Anionic polymers use immediately upon arrival. In this case, you need to be careful to select a manufacturer who can guarantee delivery within 1-3 business days.
It will be important to know which anionic polymer you need depending on your application so a good anionic polymer manufacturer should offer recommendations based on your specific needs.
Quantity in bulk purchase: You can get better deals if you buy an anionic polymer in bulk quantities.
The price for an anionic polymer depends entirely on the kind you are looking for and also, whether or not you want to go for high molecular weight anionic polymers or low-molecular-weight anionic polymers etc.
The aforementioned factors would affect the quality and cost of the anion.
Keep in mind that some may be safer while others may be toxic or can make an anionic polymer with a lower molecular weight which is cheaper.
In general, an anionic polymer would cost anywhere between $3 to $10 per kilogram depending on the quality and type you want and also, where you are buying it from. If you buy in bulk then the price will be even less expensive for an anionic polymer.
If an anionic polymer supplier is going to deliver good anionic polymers that are of high quality and meet your standards.
Make sure they are certified and offer documents showing they comply with the international standards for an anionic polymer.
You also want an anionic polymer manufacturer who has experience in dealing with anions so go through their website or contact them via email so you know what to expect from them before placing an order.
An anionic polymer Polyacrylamide can be used in many different ways but mainly, it will carry an anionic charge which means it can help repel water to prevent corrosion when applied on a surface such as oil film.
So if you want this functionality, you need an anionic polymer that can be used as an anionic film former.
You should consider an anionic polymer in China that is anionic, waterproof, and dispersed in oil but also, one of high quality so it meets your standards when you are selecting an anionic polymer manufacturer in China to purchase the right anion.